From the Desk: October 2013

Diversity! A grand concept in many different realms. So how does diversity apply to model railroading? No two layouts are alike. This keeps the observers interest high. Since no two layouts are alike, operations, scenery, motive power, and consists are all different. More diversity. How does this apply to model railroad clubs? has incorporated diversity by having multiple scales, multiple styles of layouts from N-trak to modular G and Lionel, to T-trak in N scale as well as HO. Club members represent a cross section of society, so many different ideas and concepts are presented in numerous ways. All this diversity keeps model railroading exciting for participants and viewers alike. Diversity forces new ideas and solutions to new and old problems. It also contributes to keeping those involved actively thinking about better ways to do things, new ways to build supporting equipment and modules, as well as involving fellow enthusiasts.

Currently, is in the process of developing an automatic reverse loop, making larger radius corners, updating and maintaining scenery on many modules, constructing new modules in both N and HO scales, as well as attending various shows, all at the same time. The model railroad season is upon us and we are getting ready to jump right into the middle of it. Check out pictures posted from ’s most recent endeavors, below.

Brian was MIA for this show. Fortunately, John and Lorenzo were able to attend and provide planty of excitement and trains for the public to enjoy. Brian was MIA for this show. Fortunately, John and Lorenzo were able to attend and provide planty of excitement and trains for the public to enjoy.[/caption]The Fonda Fair has become an annual staple for along with the Clayton Thousand Islands show. Both of these shows have contributed significantly to ’s exposure to the public and drawn much interest over the years. Work sessions are becoming more common to add to ’s growing collection of model railroad equipment and modules. All of these activities add to the diversity of the club and allow for many different ways to enjoy the hobby. Whether you like to build things, run trains, railfan, or just armchair model, has something diverse for everyone.

Come to the shows or a work session and see just how much fun you can truly have when you get busy in model railroading. ’s next event is our annual dinner at the Family Fun Center in Mohawk. We anticipate having a small N scale layout with, hopefully, some of the newly completed modules to exhibit and test before some of the upcoming major events. This should include the one-trak tee along with the reverse loop and possibly the new wider corners. Other items include the smaller corners that John Fleming recently scenicked. Some combination of modules will undoubtedly arrive at the dinner and present an interesting problem for all the FUNTRAK members to work on solving. This how diversity manages to maintain a high level of involvement and interest in the model railroad world. If you find this intriguing, come see us at one of the many model railroad shows. See you there!

Brian

Comments Off on From the Desk: October 2013 more...

Time to get to work!

Lots of hard work goes into building train layouts. But, our club members are so into their hobby that it’s not even like “work” at all!

work_Oct2013_02

work_Oct2013_01

Comments Off on Time to get to work! more...

27th Annual Thousand Island Train Fair

loves to get out and show off our trains!
clayton_2013_02

clayton_2013_01

Comments Off on 27th Annual Thousand Island Train Fair more...

Fonda Fair 2013

Our participation in the Fonda Fair contributes to our exposure and is fun for club members!

runnin' trains

runnin’ trains

amazing detail

amazing detail

Comments Off on Fonda Fair 2013 more...

From the Desk: September 2013

A Banner Year!

Funtrak Banner

It’s that time once more! The summer season is coming to a close, school is getting ready to reopen, and I am retired. No more school for me! has completed the annual PicNik with the usual great success. Fun, food, games, prizes, trains, and people all gathered together for a fabulous time again this year. So now is the time to reflect on the results of all this activity and to review future plans for . New this year for the PicNik were some innovations to attract attention and interest. The banner pictured above was designed and finished by Brandon White, long time supporter of model railroading and . This beautiful banner is over ten feet wide and easily visible from nearly anywhere. There is finally a flag pole to hold the American flag, and after some searching, a Canadian flag, in recognition of our Canadian friends and participants for the past ten years with the PicNik. In recognition of the importance of this tenth anniversary, LED flashlights engraved with 10th PicNik were distributed to all guests. Besides the grand prize of half the proceeds in the fifty-fifty raffle, prizes were awarded as tickets were drawn from the hat. This gave many more participants a chance to win a prize and was very popular.

The usual food supply was wonderful and our great Canadian friend David King cooked everything to perfection. The littlest guests also had a great time. Games with squirt guns, balloons, hoops, and pylons kept the smaller participants busy and entertained all day. Even the weather cooperated! After an initial rain for a short time, the sky cleared up and the rest of the day was beautiful. Finally, trains were up and running in both N scale and HO scale thanks to club members John Fleming and Greg Brockway, who coordinated the layouts with the help of other members and guests Al Wheeler and Mike LaCasse from Albany. Al and Mike brought some new modules to test and see how they operated in a T-Trak layout. Although not sceniked yet, the modules did operate flawlessly and were a welcome addition to ’s N scale T-Trak layout. These new modules presented some new advanced ideas as to construction and transport methods. T-Trak continues to grow and move forward in numerous areas.

is currently developing a one-trak concept for an automated reverse loop using an Arduino micro controller. Revision 2 of the plan is shown in the pictures on page three. The loop can be used in multiple ways. The end spacing allows it to be used with the specialty reverse loop module or as a regular module that can connect to the two standard 33mm centered modules. This arrangement allows for increasing the size of the reverse loop but does limit the ability of handling larger motive power because of the radius of the curves. It also allows the use of a single tee module without a matching tee on the other side of the layout. Of course, a special length matching straight module is required to make the layout even, but has two of those!

’s next event is the Fonda Fair followed by Clayton and then Syracuse. Hopefully, the reverse loop project will be ready to test and operate at Syracuse. Come on out and join us for all the fun at these scheduled events. See you there!
Brian

Comments Off on From the Desk: September 2013 more...

Check this out!

On a recent visit up to Canada, Brian had the opportunity to revisit a few home layouts. Excellent layouts included Justin’s, Walter’s and new this year, John Johnston’s. Justin Parry’s layout is featured above; John Johnson’s is featured below. These layouts all illustrate the craftsmanship and hard work that goes into building a quality model railroad.


Credit Valley Railway Revisited

credit-valley-railway

The layout featured above can be seen at Credit Valley Railway, the hobby shop located in Mississauga, Canada. The layout illustrates what can be done with available supplies, of which the hobby shop carries everything needed to build this fine layout. On a recent visit, Brian found the selection at the store was wonderful, the help most gracious, and prices reasonable. Many hard to find and unusual items were readily available and easy to find in the well organized store. If you are in the area, do not pass up an opportunity to visit this fine Canadian hobby shop.

Comments Off on Credit Valley Railway Revisited more...

From the desk: July 2013

Well, we’re getting into summer now! The setup scheduled for Dave’s Diner on June 25th fell through due to the inclement weather. It’s summer–such things happen. Members showed up all ready to set up and run trains, alas the rain started falling out of the sky and put an end to that idea. In spite of the bad weather, club members had a splendid dinner. Dave has always supported the club and we look forward to setting up at a future date when the weather will hopefully cooperate better.

had a great work session this month, with Greg making vast strides in moving us ahead with HO t-trak. Hopefully, it will be up and running fornext months PicNik!

In addition to layout builds, Brian and team have been steadily persevering at the software program to operate the reverse loop for the N scale T-trak one trak project. With continued efforts the reverse loop may be ready for operation at the upcoming PicNik.

It’s time to celebrate! The 10th Annual PicNik will take place at Brian’s on Sunday, August 4. Everyone is welcome. Bring the family and plan to stay the day. It’s going to be a great time with food, games, and socializing.

Comments Off on From the desk: July 2013 more...

Steadily persevering

Brian, in conjunction with Mark Bean and David King, has been steadily persevering at the software program to operate the reverse loop for the N scale T-trak one trak project. It seems that the simplest things are not as simple as they might at first appear. The overall concept of the reverse loop is to have a train enter going in one
direction and exit going in the opposite direction. Automating this means that the software has to recognize where the train is at any given time, what the power requirements are at that time, and changing any necessary hardware to
accommodate the train as it moves along. All this is pretty straightforward, but implementing it with the software and getting it to operate the way it is planned is nowhere near as simple as it sounds.

First, the hardware does not always cooperate. Checking the polarity is not always reliable, so the software needs to
be written to compensate for possible misreadings. Then the magnetic sensors have to be checked and again compensated for any misreadings. Finally, all the action has to be timed perfectly, and put together in one complete package designed to operate without failure. Sounds easy enough but in reality, it is much more difficult and mostly, time
consuming than it at first would appear. Persistence is the order of the day and Mark, David, and Brian will keep at it
until finished. A photo of the temporary setup is pictured below.

Temporary test setup

Temporary test setup


HO building continues

Coming along

Coming along

Brian and Greg spent a productive Saturday putting together the new modules. Greg had already done most of the preliminary work by trimming the framing wood to the correct size. All that remained was to miter the corners, build some supporting blocks, glue, nail, and assemble the pieces. Final construction included putting the tops on the frames and trimming with the router. A few hours later, and the modules were ready for painting and track work. Greg took his new treasures along with him to work on them more at home. We anxiously await the presentation of these new modules for public viewing.

Comments Off on HO building continues more...

  • Events

    15 Feb
    15 Feb 25
    Syracuse
    22 Feb
    22 Feb 25
    Allentown
  • Monthly Newsletters

    Click to download a PDF version of FUNTRAK TIMES!

    Funtrak April Newsletter

    Funtrak May Newsletter
  • Copyright © 1996-2014 FUNTRAK. All rights reserved.
    Privacy Policy | Graphics and Website Design by aka design | iDream theme by Templates Next | Powered by WordPress | Hosted by Bluehost
    KeepandShare.com(R) Free Calendar